Description
AIRTEC Motorsport Mondeo Mk3 2.0/2.2 Turbo Diesel front mount Intercooler – comes with full brackets and fittings included.
AIRTEC Motorsport latest creation is this intercooler for the Mondeo 2.0 & 2.2 turbo diesels, they have now changed the total design with new high flow 60mm core and angled flow end tanks, which in turn has increased power, torque and also lowered Air Charge Temperatures. Yes, it’s really that good.
TESTED
BHP & torque gains on standard car fitted with AIRTEC Motorsport intercooler upgrade rolling road carried out at AmD Motorsport. Gains. 5.2 bhp increase and torque rose by a massive 31.5 lb ft, this figure will be easily doubled when fitted to a remapped Mondeo). Test results from Street Performance’s modified Mondeo diesel. Modifications are: Free flow exhaust and decat, Pipercross panel filter, massive AIRTEC Motorsport intercooler upgrade – custom map. Street Performance’s Mondeo made 208bhp and 441 lb ft of torque.
David at Street Performance said: “Figures are very good, even without the map it measured 173bhp instead of 155bhp. With mapping we saw the power rise to 208bhp. We did limit the car’s torque for more revs and a smooth power curve as possible. But this will be raised 10-15lb ft after some more fiddling with the map along with 220+bhp to make ST220/ST225 owners jealous, with same or better performance with 40-50mpg“.
They also tested two cars to see what the intake air charge temperatures were under load, a complete standard car and Street Performance’s modified Mondeo. Both cars tested with 8 degrees Ambient Air temps. Results: Completely Standard car under load, the intake temperatures kept rising up to 55-60° and above.
Fully tuned car with the AIRTEC Motorsport intercooler fitted and the intake temps never went higher then 15°, so intercooler works very well and gives much less stress on engine.
Dimensions:
Height: 350mm
Width 685mm
Depth: 60mm
AIRTEC part no: ATINTFO14
AIRTEC Motorsport Intercooler Upgrade for Mondeo Mk3 2.0/2.2 Turbo Diesel
£324.14
This huge intercooler will reduce those much needed ACT’s (Air charge Temperatures) and help increase power and save fuel due to the original intercooler being too small to cope!
AIRTEC part no: ATINTFO14
Description
AIRTEC Motorsport Mondeo Mk3 2.0/2.2 Turbo Diesel front mount Intercooler – comes with full brackets and fittings included.
AIRTEC Motorsport latest creation is this intercooler for the Mondeo 2.0 & 2.2 turbo diesels, they have now changed the total design with new high flow 60mm core and angled flow end tanks, which in turn has increased power, torque and also lowered Air Charge Temperatures. Yes, it’s really that good.
TESTED
BHP & torque gains on standard car fitted with AIRTEC Motorsport intercooler upgrade rolling road carried out at AmD Motorsport. Gains. 5.2 bhp increase and torque rose by a massive 31.5 lb ft, this figure will be easily doubled when fitted to a remapped Mondeo). Test results from Street Performance’s modified Mondeo diesel. Modifications are: Free flow exhaust and decat, Pipercross panel filter, massive AIRTEC Motorsport intercooler upgrade – custom map. Street Performance’s Mondeo made 208bhp and 441 lb ft of torque.
David at Street Performance said: “Figures are very good, even without the map it measured 173bhp instead of 155bhp. With mapping we saw the power rise to 208bhp. We did limit the car’s torque for more revs and a smooth power curve as possible. But this will be raised 10-15lb ft after some more fiddling with the map along with 220+bhp to make ST220/ST225 owners jealous, with same or better performance with 40-50mpg“.
They also tested two cars to see what the intake air charge temperatures were under load, a complete standard car and Street Performance’s modified Mondeo. Both cars tested with 8 degrees Ambient Air temps. Results: Completely Standard car under load, the intake temperatures kept rising up to 55-60° and above.
Fully tuned car with the AIRTEC Motorsport intercooler fitted and the intake temps never went higher then 15°, so intercooler works very well and gives much less stress on engine.
Dimensions:
Height: 350mm
Width 685mm
Depth: 60mm
AIRTEC part no: ATINTFO14
Additional information
Related products
AIRTEC Motorsport Intercooler for Kia Ceed GT
£495.00 Read moreAIRTEC Motorsport Stage 2 Intercooler for Fiesta Mk8 ST-200
£395.00 Read moreAIRTEC Motorsport Side Mount Intercooler for Renault Megane 4 280 & 300
£595.00 Read more